• Facebook
Call Now: 800-322-5832 | info@scanningspheres.com
  • 0Shopping Cart
ScanningSpheres
  • Tools for Metrology
  • Products
    • Ball Bars
    • Calibration Services
    • Condor Scale Bar
    • Custom Fine Adjustment Screws
    • Integration Spheres
    • Plate Target
    • Specs | White Papers
      • Materials
      • White Papers
    • Target Spheres
  • What’s New
  • Contact
  • Search
  • Menu Menu

Short Adapter Screws

$18.43

We carry a full line of Dual Threaded Adaptor Screws which have a different thread on each end. These threaded adaptors will match all of our Coordinate Measuring Machine evaluation and fixture building devices to the threads in the table of any C.M.M. or competitor’s pallet system. The short version of these threaded adaptors (Table #1) have an overall length of 1.5 inches (38.1 mm) and each of the threads is 3/4 inch (19 mm) long, except the 1/4 inch-20 to M10 x 1.5, where the 1/4 inch diameter is only 1/2 inch (13 mm) long.

 

Clear
SKU: N/A Category: CMM Products
  • Description

Description

SHORT ADAPTER SCREWS S-10M-10M S-10M-10M $18.43
SHORT ADAPTER SCREWS S-12M-10M S-12M-10M $18.43
SHORT ADAPTER SCREWS S-250-10M S-250-10M $18.43
SHORT ADAPTER SCREWS S-312-10M S-312-10M $18.43
SHORT ADAPTER SCREWS S-375-10M S-375-10M $18.43
SHORT ADAPTER SCREWS S-500-10M S-500-10M $18.43
SHORT ADAPTER SCREWS S-8M-10M S-8M-10M $18.43

Because these Dual Threaded Adaptor Screws get such heavy use, we machine a reduced-diameter on the very ends to avoid damaging the thread. The two threads have an undercut in the center to allow either of the threads to be tightened fully without any chance of binding. The Dual Threaded Adaptor Screws will not rust because they are manufactured from a very corrosive resistant type 18-8 Stainless Steel. The highest quality threads with increased tensile strength are produced by cold rolling the thread forms. There is a screwdriver slot provided at the end of each thread of the short version and in the long threaded end of the long version. With the aid of a coin or screwdriver, the Dual Threaded Adaptor Screw can be securely tightened into its mating part. The long version of these Dual Threaded Adaptor Screws have an overall length of 2.5 inches (76.2mm). The table, or short end thread, is 3/4 inch (1.9cm) long; and the M10x1.5 thread is 1.75 inches (44.5 mm) long, except the 1/4 inch-20 to M10x1.5, where the 1/4 inch diameter thread is only 1/2 inch (13mm) long.

If one of these fourteen combinations does not meet your requirements, we will be pleased to supply any other combination on special order.

Related products

  • 45 Degree Angle Block

    $129.80
  • PLATE TARGET

    $587.00 – $2,174.00
  • Kinematic Quarter Round

    $53.90 – $163.90
  • VEE Blocks

    $24.23 – $173.25
©2025 Scanning Spheres/Bal-tec Division. All Rights Reserved. | Site Design: ArtBoiCreative.com

  • Facebook
Canoe SpheresPLATE TARGET
Scroll to top